Round Brilliant 这价格是批发价还是钻石的本身价,商家报价跟你这个很像 这个是钻石的本身价格 批发价还会少一点
Measurements
Diamond dimensions listed as “minimum diameter – maximum diameter x depth” for round diamonds and “length x width x depth” for fancy-shaped diamonds.
8.04 - 8.07 x 5.02 mm
Carat Weight
Weight given in carats, recorded to the nearest hundredth of a carat. One carat is equal to 1/5 of a gram.
2.02 carat
Color Grade
The absence of color ranging from colorless to light yellow or brown when compared to GIA Master Color Comparison Diamonds.
G
Clarity Grade
The relative absence of inclusions and blemishes. Graded on a scale from Flawless to Included based on size, nature, number, position, and relief of characteristics visible under 10x magnification.
VS2
Cut Grade
For standard, D-to-Z color, round brilliant diamonds. Cut grade incorporates the aspects of face-up appearance, design, and craftsmanship.
Excellent
proportions
Depth
Table-to-culet depth, expressed as a percentage of average girdle diameter for round shapes or width for fancy shapes.
62.3%
Table
Table size expressed as a percentage of a round brilliant’s average girdle diameter for round shapes or width for fancy shapes.
59%
Crown Angle
The average of the angles of the bezel facet planes relative to the table planes.
35.5°
Crown Height
Measurement from the table plane to the intersection of the bezel facet with the girdle. The Crown Height % is the average crown height relative to the average diameter for round shapes and width for fancy shapes.
14.5%
Pavilion Angle
Average of the angles formed by the pavilion main facet planes and the girdle plane.
41.0°
Pavilion Depth
Measured from the girdle to the culet, then expressed as a percentage of average girdle diameter for round shapes or width for fancy shapes.
43.5%
Star Length
Length of star facets expressed as a percentage of the total distance between the girdle and the edge of the table facet.
45%
Lower Half
Length of lower-half facets expressed as a percentage of the total distance between the girdle and the culet.
75%
Girdle
Thickness of the intersection of the crown and pavilion which defines the perimeter of the diamond.
Slightly Thick, Faceted, 4.0%
Culet
Size of the facet at the tip of a gemstone relative to the average diameter for round shapes or width for fancy shapes.
None
finish
Polish
Smoothness of the diamond’s surface, assessed on a scale ranging from excellent to poor.
Excellent
Symmetry
Exactness of the diamond’s outline, and the shape, placement, and alignment of its facets, assessed on a scale ranging from excellent to poor.
Excellent
圆形明亮
测量
钻石尺寸列为“最小直径–最大直径x深度”的圆形钻石和“长×宽×深“花式形钻石。
8.04- 8.07 x5.02毫米
克拉重量
在克拉重量,记录到的最近的第一百克拉。一克拉等于5克1/。
2.02克拉
颜色等级
颜色从无色至浅黄色或棕色的相比,颜色比较缺乏GIA钻石。
G
净度等级
的夹杂物和瑕疵相对缺乏。在一个规模从完美无瑕的分级包括基于大小,性质,数量,位置,和10倍放大镜下可见的地形特征。
VS2
切工
标准,d-to-z颜色,圆形明亮式切割钻石。切工结合方面的脸上出现,设计,工艺。
很棒
的比例
深度
桌底面深度,表现为圆形或宽腰带形状奇特的平均直径的百分比。
62.3%
表
表的大小表示为一个圆形的平均腰棱直径为圆形或宽的形状奇特的百分比。
59%
冠角
平均的角度的斜小面飞机相对表面。
35.5°
冠高
从表面与带斜小面的交汇测量。冠高%是相对于花式形状圆的形状和宽度的平均直径的平均树冠高度。
14.5%
亭角
平均角亭主刻面平面形成和带平面。
41°
展馆深度
测量从腰带上的底面,然后表现为圆形或宽腰带形状奇特的平均直径的百分比。
43.5%
星长度
星刻面表示为带及台面边缘之间的距离的百分比的总长度。
45%
下半
下半时表现为带和底面之间的百分比的总距离长度。
75%
腰带
对冠亭,定义了钻石的周边路口厚度。
稍厚,面,4%
底面
的小尺寸在宝石相对于圆形或宽的形状奇特的平均直径的尖端。
没有
完成
波兰
钻石的表面光洁度,在一个规模不等的优秀贫困评估。
很棒
对称性
钻石的轮廓精度,和形状,位置,和调整方面,在规模不等的优秀贫困评估。
很棒
以上就是你这张GIA内容中文翻译版的, 东西还是可以的 有收藏价值的 价格是175667元 在往上高了就不合算了追问