摘要：矿井提升机是矿山的最基本也是最重要的设备，如何控制提升机的运行状态、保证其能正常运输矿物，是本次设计的初衷。在本次设计中用到的是力控软件，通过力控软件对矿井提升机进行实时监控，调整电机的转速与正反转，使提升机运行在一个标准的状态。
在设计过程中，首先是对软件进行熟悉操作，然后开始绘制工程组态画面，在绘制前先定义外部链接数据，之后再绘图，然后就是编写工程脚本程序（详见论文正文），最后做的是报警系统设置，大概就分为这几步。做完之后，矿井提升机的监控系统就完成了，中间当然还有其他一些过程，在此就不做描述了，具体可以看论文正文介绍。
Abstract: mine hoist is mine the first and most important equipment, how to control the operation of the hoist can ensure the normal state, the transportation mineral, the design is the original intention. In this design is used in force control software, through the force control software to mine hoist the real-time monitoring, adjust the motor speed and positive &negative, make the ascension in a chance standard state. In the design process, first is familiar with the operation of software, and then started to draw engineering configuration screen, drawing in before the external links definition data, then the drawing, and then is to write engineering script (as shown in the paper text), finally do is set the alarm system, it is divided into this a few steps. After finishing, mine hoist monitoring system was finished, among other some process, in this is not done describe, specific can see paper introduced the text.
参考知识1
可以在翻译器上面翻译哦。在百度上搜索“翻译器”就会出来的 。望被采纳。。。
参考知识B
jpylkj,hg;lh';jl