行程X/Y/Z轴
工作台
数量
尺寸
T型槽（数量×规格×间距）
定位中孔
工作台交换时间
单个工作台最大承重
进给速度
快速移动速率
切削进给速率
排屑器
2条螺旋式排屑器
1条链板式排屑器
双向定位精度
X、Y、Z全行程
第四轴
双向重复定位精度
X、Y、Z全行程
第四轴
主轴电机
额定功率
额定扭矩
转速
刀库
刀库形式及储刀数
锥度
刀库
刀具最大直径
换刀速度（from tool to tool）
刀盘分度时间
选刀方式
刀具最大重量
回转工作台
额定扭矩
锁紧扭矩
快进速度
工作进给速度
机器尺寸
总重量
数控系统
行程X/Y/Z轴：route：X/Y/Z axis，（行程也可以用travel表示）
工作台：work station或者worktable
数量：quantity
尺寸：size
T型槽（数量×规格×间距）：T type tank（The number of X specification X interval）
定位中孔：Positioning hole
工作台交换时间：work station exchange time
单个工作台最大承重：Maximum load – bearing for a single worktable
进给速度: feeding speed
快速移动速率: Fast Moving speed
切削进给速率：Cutting feed rate
排屑器：chip remover
2条螺旋式排屑器：two spirals chip remover
1条链板式排屑器：one Chain plate chip remover
双向定位精度：both-way positioning accuracy
X、Y、Z全行程:X、Y、Z full travel
第四轴:the fourth axis
双向重复定位精度: both-way replicate positioning accuracy
X、Y、Z全行程: X、Y、Z full routine
主轴电机；Spindle motor
额定功率：nominal power 或者翻译成 power rating
额定扭矩：nominal torque
转速; rotate speed
刀库: tool changer
刀库形式及储刀数: the mode of tool changer and the number of knives Storage
锥度: taper
刀具最大直径: max diameter of cutting tools
换刀速度（from tool to tool）: Tool changing speed
刀盘分度时间: Cutter indexing time
选刀方式: Tool selection mode
刀具最大重量: max weight of cutting tools
回转工作台: rotary worktable
额定扭矩: nominal torque
锁紧扭矩: Locking torque
快进速度: Fast moving speed
工作进给速度: Feed rate
机器尺寸: machine dimension
总重量:the total weight
数控系统: numerical-controlled system
我不是学数控车床的，只能帮您这么多
参考知识1
Travel X/Y/Z axis
workbench
number
size
T trough (quantity x specifications x spacing)
Positioning in the hole
Workbench exchange time
Single workbench maximum bearing
Feeding speed
Fast moving rate
Cutting feed rate
Scraps discharge device
2 the spiral scraps discharge device
1 the chain plate scraps discharge device
Two-way positioning accuracy
X, Y, Z full schedule
The fourth shaft
Two-way repositioning precision
X, Y, Z full schedule
The fourth shaft
Spindle motor
Rated power
Rated torque
speed
Knife library
Knife library form and store knife number
taper
Knife library
Tool biggest diameter
Change cutters speed (tool to tool) -
Knife dish indexing time
Choose knife way
Tool maximum weight
Rotary worktable
Rated torque
Lock torque
Fast forward speed
Work feeding speed
Machine size
Total weight
Nc system
在有道在线翻译里可以，那里是专门给翻译用的。
参考知识B
Travel X/Y/Z axis
workbench
number
size
T trough (quantity x specifications x spacing)
Locating in hole
Workbench exchange time
Single workbench maximum bearing
Feeding speed
Fast moving rate
Cutting feed rate
Scraps discharge device
2 the spiral scraps discharge device
1 the chain plate scraps discharge device
Two-way positioning accuracy
X, Y, Z full schedule
The fourth shaft
Spindle motor
Rated power
Rated torque
speed
Knife library
Knife library form and store knife number
taper
Knife library
Tool biggest diameter
Change cutters speed (tool to tool) -
Knife dish indexing time
Choose knife way
Tool maximum weight
Rotary worktable
Rated torque
Lock torque
Fast forward speed
Work feeding speed
Machine size
Total weight
Numerical control system
参考知识C
行程X/Y/Z轴
Travel X/Y/Z axis
工作台
workbench
数量
number
尺寸
size
T型槽（数量×规格×间距）
T trough (quantity x specifications x spacing)
定位中孔
Locating in hole
工作台交换时间
Workbench exchange time
单个工作台最大承重
Single workbench maximum bearing
进给速度
Feeding speed
快速移动速率
Fast speed
切削进给速率
Cutting feed rate
排屑器
Scraps discharge device
2条螺旋式排屑器
2 the spiral scraps discharge device
1条链板式排屑器
1 the chain plate scraps discharge device
双向定位精度
Two-way positioning accuracy
X、Y、Z全行程
X, Y, Z full schedule
第四轴
The fourth shaft
双向重复定位精度
Two-way repositioning precision
X、Y、Z全行程
X, Y, Z full schedule
第四轴
The fourth shaft
主轴电机
Spindle motor
额定功率
Rated power
额定扭矩
Rated torque
转速
speed
刀库
Knife library
刀库形式及储刀数
Knife library form and store knife number
锥度
taper
刀库
Knife library
刀具最大直径
Tool biggest diameter
换刀速度（from tool to tool）
Change cutters speed (tool to tool) -
刀盘分度时间
Knife dish indexing time
选刀方式
Choose knife way
刀具最大重量
Tool maximum weight
回转工作台
Rotary worktable
额定扭矩
Rated torque
锁紧扭矩
Lock torque
快进速度
Fast forward speed
工作进给速度
Work feeding speed
机器尺寸
Machine size
总重量
The total weight
数控系统
Numerical control system